Mac OSx/Lion on the Shuttle X50V2

UPDATE

You can install Mac Lion 10.7.3 on the Shuttle X50 V2 (Plus)

There is a Lion Atom kernel that can be downloaded from here.

After you purchase Lion from Apple via their USB or from the Apple store.

You can create a Lion installer USB by using UniBeast, download here and follow these instructions.

Once you have the USB Lion installer done, you will have to copy the mach_kernel_atom.10.7.1.bz2 that you downloaded from above to the root of the Lion USB installer.

Next, you will have to edit the org.chameleon.boot.plist to include the following:

<key>Kernel</key>
<string>mach_kernel_atom.10.7.1</string>

<key>Kernel Flags</key>
<string>arch=i386 npci=0x2000 PCIRootUID=1</string>

<key>GraphicsEnabler</key>
<string>No</string>

<key>Instant Menu</key>
<string>Yes</string>

<key>Legacy Logo</key>
<string>Yes</string>

<key>EthernetBuiltIn</key>
<string>Yes</string>

<key>GenerateCStates</key>
<string>Yes</string>

<key>GeneratePStates</key>
<string>Yes</string>

This must be done on the Lion USB installer first.

Now, go back to the installation instructions above and follow those to install Lion.

Once Lion is installed, install MultiBeast and install either EasyBeast or your DSDT.
(I have a client that has an X50 V2 running Ubuntu, so am going to try to get them to make a DSDT for this system.)

Now move the mach_kernel_atom.10.7.1 to the root of the target system and make the same changes to the org.chameleon.Boot.plist as were made before. (I’m not sure why this has to be done twice, I would think it could be copied from the UniBeast USB drive)

Now you can run the 10.7.3 Update Combo.

Remove the UniBeast USB drive and reboot to the hard drive.

Installation complete.

Important Note:

I have not tried this install as of yet, so not sure on the drivers for the WiFi, Web Cam, Card Reader and Audio.
I’m also not sure the Touch Screen will work natively.

Be sure to follow all instructions carefully and have fun.  Please report back with successes or problems.  I will try to help
as much as I can with any problems.

 

 

 

Apple quit supporting the Atom processor in version 10.6.2, so you would need version 10.6.1 to install Mac on the X50V2. I couldn’t find that version on Apple’s website to purchase and download, so not sure how to get it. If anyone knows where to get a legal copy, please let me know.

As I stated in an earlier post, you can install Macbuntu on the X50V2 and I’ve posted links to download Macbuntu.

Advertisement

Shuttle SH67 Series

Shuttle has 2 chassis designs for the SH67 the H3 and the H7.

Shuttle SH67H3 Chassis with open front Design

Shuttle SH67H7 Chassis with Front Door Design

 

 

 

 

 

 

 

The SH67 will be using the Realtek ALC888 codec for the Audio and the Realtek RTL 8111E Lan controller, which makes this model a very viable candidate for Mac OSX.

Hackintosh on the SH55J2 successes!!

It seems the Hackintosh community has been able to successfully install Snow Leopard on the Shuttle SH55J2 model. The only problems they had was the network and audio drivers, which they found a solution to.
They say, it even boots without iBoot once Multibeast has been installed.

We’re going the check this out and I’ll post our results. I’ll also post the links to the network and audio drivers.

Stay tuned.